SORD Smock - ATACS AU - X-Large Description
Produced with feedback from operators and already in use in some areas of interest around the world. [see independent product review]
Multicam® and ATACS® versions are produced from 100% NYCO Material. Tan version produced from Ripstop cotton.
Smock features a generous hood. Instead of the usual wire common in most smock designs, we replaced it with a more pliable tubing instead.
The smock features ELEVEN pockets (five around the waist, four on the chest and two on each bicep).
The bicep pockets consist of a large zipper opening main pouch, with a smaller top opening pocket for range cards, etc.
The outer face of the bicep pockets features a large 4” x 4” Velcro panel for attaching IFF, ANFs, etc, however if this feature is not needed, each garment comes with a spare panel of matching material to cover this feature up.
The four chest pockets consist of two large pockets with button closure and two side zip opening pouches for easy access while wearing body armour or chest rigs. The two main pockets feature large slotted buttons for quick and easy access while wearing gloves or with numb fingers.
In the centre of the chest on the left side there is a zipper opening to allow access to chest pockets on any garment worn underneath the smock. The remaining five pockets around the waist (four same size as chest pocket, fifth double sized) also sport large slotted buttons and can be used to stash gloves, rations or just about anything else to boost your load carrying ability if required.
The smock also features a large pit opening on each side which when undone allow the wearer to dispose of unwanted body heat. Each forearm is reinforced with matching 1000D cordura for those unexpected trips to the ground.
The lower forearm of each side also features four tie off points for gloves, etc.
The Smock is not water-proof.
Click HERE to read the Red Back One product review!
"Best Freedom of Movement in any smock I have used (have owned 3 others, not even close to SORD smock). Liked waist cord feature, kept heat in when pulled tight, could ventilate when left loose. Armpit zips are brilliant!"
|SIZE||SLEEVE (in.)||CHEST (in.)|
HOW TO TAKE MEASUREMENTS:
Sizes are based on body size, not clothing dimensions (Unless specifically stated).
(IMPORTANT. The SORD Smock is very generously sized, designed to be able to be worn armour or numerous layers of cold weather gear. If you do not intend to where it over gear, order 2 sizes down from your regular size.
Measure from the centre of your chest to your desired cuff length. Make sure to keep your arm stretched out.
With largest gear and/or cold weather gear ensemble expected to be worn, measure circumference at largest point. This is the torso measurement that should be used to select size. If not intending to wear over gear or thick outer wear, choose 2 sizes under your normal sized jacket.
Be The First To Review This Product!
Help other SORD Australia users shop smarter by writing reviews for products you have purchased.